fitting wheels

Newbie Posts : 11 Join date : 2009-11-07

pretty new on the forum, just woundering whats needed to get audi a4 wheels to fit my mk3 golf any help appriciated Smile

. Posts : 7423 Join date : 2009-06-17

you'll need to know what stud pattern they are?

thats a starting point..

Newbie Posts : 11 Join date : 2009-11-07

they 5x112 as far as i know and mines 5x110
will find out the ET difference later Smile

. Posts : 7423 Join date : 2009-06-17

wobble bolts might be your best bet...

Mod Posts : 776 Join date : 2009-07-20

I'd go for some adaptors. Wobble bolts are good it the PCDs are closer to e.g. 4x98 (Minilites) to 4x100 (MK1-2-3 Golf)

. Posts : 7423 Join date : 2009-06-17

DaveMK3 wrote:: I'd go for some adaptors. Wobble bolts are good it the PCDs are closer to e.g. 4x98 (Minilites) to 4x100 (MK1-2-3 Golf)

but his PCD is ok... 5x112 to 5x110

adapters would be no good as they would be overlapping the holes...

Mod Posts : 776 Join date : 2009-07-20

Sorry. Misread that they were 5x110.

Thought Golfs were 5x100

. Posts : 7423 Join date : 2009-06-17

DaveMK3 wrote:: Thought Golfs were 5x100

if thats the case then adapters is the only way..

Newbie Posts : 11 Join date : 2009-11-07

yeh my mistake golf is 5x100, where can i get adaptors from, any ideas

Mod Posts : 776 Join date : 2009-07-20

Venom Motorsport sell them. PSI Tuning can get them in for you as well, but its was cheaper from even, even when i drove up to there store to get them.

. Posts : 4314 Join date : 2009-07-20

i had some mate for my lupo as it was 4x100 and the porsche wheels i had were 4x108 they cost me 90 quid for the 4 that was botls plus the metal and the alloy light weight porsche wheel nuts